CAMPING TENT MH100 - 2 PERSON
EASY ASSEMBLY / DISMANTLING
Free-standing structure. Simple pole installation.
130 X 210 cm bedroom. (2 x 65 cm sleeping bags) Maximum useful height: 105 cm
We only dye one thread in two to reduce the environmental impact.
Dimensions of the cover: 54 x 16 x 16 cm / 8 L. Weight: 2.4 kg
Flysheet and ventilation at the back. Not equipped with Fresh technology.
UPF 30 fabric: lets in daylight and filters out some UV rays.
Withstands 40 km/h winds (Force 5): validated in wind tunnels on rotating plate.
Water column (Schmerber): Flysheet > 2000 mm. Groundsheet > 5000 mm.
|Description||An accessible tent that passes all our durability and waterproofing tests. The free-standing dome structure enables you to move it once it has been assembled, to find the best location.|
|number of users||2 persons|
|storage space||Without storage space|
|number of rooms||1 room|
|living area||Without living area|
|assembly type||Assembly with poles|
|Dimension (L x W x H)||82" x 51" x 42"|
|Pitching / striking||Standard dome assembly: the bedroom is pitched with the poles, and the flysheet is then fastened on top. Reverse procedure when dismantling.If it is windy it is advisable to attach the guy ropes that are provided in the tent bag.|
|Mattress Compatibility||We recommend you use the tent with the self-inflating or trekking mattress measuring a maximum of 65 cm wide. We do not recommend the use of inflating mattresses above 6 cm deep in this tent due to the reduction in living space and resistance to condensation.|
|Ventilation||1 upper rear air vent. Correctly position the lateral tent pegs to maintain a space between the flysheet and the ground all around the tent. The good air circulation between the bedroom and the flysheet will limit the natural phenomenon of condensation.|
|Waterproofing||All Quechua tents are validated in a laboratory (whole tent under 200 L/hour for 3 hours), as well as in the field. (2000-mm rated PU-coated polyester flysheet, 120g/sqm polyethylene groundsheet, all seams are sealed with thermobonded tape). A breathable polyester bedroom under the flysheet means you don't come into contact with the condensation that forms naturally on the inside of the flysheet.|
|Wind resistance||We test all of our tents in a wind tunnel on a rotating table to expose each side of the tent to the wind. A well-assembled tent with all the guy ropes properly deployed around the tent should remain habitable with a wind speed measured at 40 km/h near the ground (Force 5).|
|Environmental benefit: Why is my product grey?||Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this impact on the environment, we use only one mass-dyed yarn out of every two (Bi-ton), reducing our consumption and our impact on water. So that's why your product is grey.|
|The product contains||
|Storage Advice||After use or cleaning, wait until the tent is perfectly dry before putting it away in order to avoid bad smells and mould.|
|Warranty||3 years warranty on the stitching and waterproofing. No warranty on the poles, threads, plastics or any physically induced damage.|
|Country Of Origin||Bangladesh|